What makes this sound

Questions about producing? Ask them here.
Just re reading over the thread, and VST's that have been recommended, i want to make sure i have not miscommunicated.

I am not asking about the sound that only occurs at 0:57, not the one that is a Vinyl record being spun backwards briefly, the sound i am talking about starts there and continues on into the track, it stops at 1:37 then.

So it begins at 0:57 and exits at 1:37
Sybth 1 vst ?

https://www.youtube.com/watch?v=FmMsTBG--VM

1m24 ?

But I wonder if its a sampler we hear.

It totally reminds me of james brown is dead at 0.40 .

https://www.youtube.com/watch?v=dN8e9b2ON8s

I think I hear a pitch change, but musicbear will probably know how to do this. :)
I can hear what you mean, James brown is dead does sound close to it alright, i actually own that in Vinyl as it happens.

I will experiment with Synth 1 and see how i go.

thanks.
I stmbled across this when looking for information on how to replicate James brown is dead sounds,

http://llamamusic.com/s50s550/unusual_samples.html

I now have them all downloaded, need a little bit of emulation here now i reckon to be able to access the content.
Gps wrote:
Tue Jun 18, 2019 4:03 pm
Are we talking MALCOLM McLAREN - BUFFALO GALS ?
Indeed we are :D
Incorruptable wrote:
Tue Jun 18, 2019 4:20 pm
I am not asking about the :: Vinyl record being spun backwards briefly,
Now that is kind of a problem since thats exactly what Glitch can do :P

i am talking about starts there and continues on into the track, it stops at 1:37
So it begins at 0:57 and exits at 1:37

whole new ballgame :p
Yep Gps is correct : Synth1
Its a somewhat detuned saw with a noise-element, and a LP filter fairly open, but you have better info i understand
musikbear wrote:
Wed Jun 19, 2019 1:39 pm
whole new ballgame :p
Yep Gps is correct : Synth1
Its a somewhat detuned saw with a noise-element, and a LP filter fairly open, but you have better info i understand
Ok,

I will try out Synth 1 with a detuned SAW and LP filter.

If you want to try and replicate it please do and offer up what you find, i would greatly appreciate it.
Incorruptable wrote:
Wed Jun 19, 2019 3:51 pm
Ok,

I will try out Synth 1 with a detuned SAW and LP filter.

If you want to try and replicate it please do and offer up what you find, i would greatly appreciate it.
I Tried Synth 1 with detuned saw and low pass filter, think the speed of the saw was a problem before i quit for the night, have to speed up the sound and add noise to see if i can get close.

Who is online

In total there are 4 users online :: 0 registered, 0 hidden and 4 guests (based on users active over the past 5 minutes)
Most users ever online was 173 on Fri Apr 19, 2019 11:04 am

Users browsing this forum: No registered users and 4 guests