Apparently, Llamas can Meow (LB032 Preset)

Write guides and how-tos about LMMS for other members.
I was messing around with the knobs on the LB302 Bass Synth, and apparently this little rainbow llama can meow. The following presets will generate a sound similar to a person speaking the word 'meow'. I don't know how to export these presets, so here I've typed them out at their exact settings so you can replicate them. Sounds best from E3 to E5. I recommend including the Effects Chain plugin settings as they are so you don't make your ears bleed.

Meow to your hearts' content, my friends.

\\\General Settings///
LB 302 bass synth
Icon: Cute little rainbow llama
Volume : 27%
***PLUGIN***
VCO: Bandlimited Saw Wave

Slide Decay: 0.72
VCF:
24 db -- Off / Cut -- 0.82 / Res -- 1.04 / EnvMod -- 0.035 / Decay -- 0.195
Slide -- On / Dead -- Off / Dist -- 0

***FX***
Effects Chain
DUAL FILTER
W/D -- 1 / Decay -- 5300 ms / Gate -- 0
(Controls)
(LowPass) (FREQ -- 14426Hz / Reso -- 0.5 / Gain -- 200%)
(MIX -- 0)
(HighPass) (FREQ -- 3988 Hz) / Reso -- 2.28 / 167.1%)

C* EQ
W/D -- 1 / Decay -- 0 ms / Gate -- 0
(Controls)
(31 Hz -- -47.97) (63 Hz -- -24.12) (125 Hz -- 5.04)
(250 Hz -- -7.9) (500 Hz -- 1.62) (1kHz -- -23.2)
(2kHz -- 2.34) (4kHz -- -47.97) (8Khz -- -47.97)
(16kHz -- -47.07)
(Link Channels -- On)
DisposableScissors wrote:
Mon Dec 31, 2018 6:03 am
I was messing around with the knobs on the LB302 Bass Synth, and apparently this little rainbow llama can meow. The following presets will generate a sound similar to a person speaking the word 'meow'. I don't know how to export these presets, so here I've typed them out at their exact settings so you can replicate them. Sounds best from E3 to E5. I recommend including the Effects Chain plugin settings as they are so you don't make your ears bleed.

Meow to your hearts' content, my friends.

\\\General Settings///
LB 302 bass synth
Icon: Cute little rainbow llama
Volume : 27%
***PLUGIN***
VCO: Bandlimited Saw Wave

Slide Decay: 0.72
VCF:
24 db -- Off / Cut -- 0.82 / Res -- 1.04 / EnvMod -- 0.035 / Decay -- 0.195
Slide -- On / Dead -- Off / Dist -- 0

***FX***
Effects Chain
DUAL FILTER
W/D -- 1 / Decay -- 5300 ms / Gate -- 0
(Controls)
(LowPass) (FREQ -- 14426Hz / Reso -- 0.5 / Gain -- 200%)
(MIX -- 0)
(HighPass) (FREQ -- 3988 Hz) / Reso -- 2.28 / 167.1%)

C* EQ
W/D -- 1 / Decay -- 0 ms / Gate -- 0
(Controls)
(31 Hz -- -47.97) (63 Hz -- -24.12) (125 Hz -- 5.04)
(250 Hz -- -7.9) (500 Hz -- 1.62) (1kHz -- -23.2)
(2kHz -- 2.34) (4kHz -- -47.97) (8Khz -- -47.97)
(16kHz -- -47.07)
(Link Channels -- On)
Cool! This deserves to be in the tutorials section. I shall send it there right now.