Electric_Guitar_Triple_Osc

Write guides and how-tos about LMMS for other members.
*Note these are just the variables my triple osc was at when i made this, you could probably do better if you tried
also that variable may be very precise, again this is just the way i found it


For the (PLUGIN) tab;

make sure the first 2 modes on top are set to [MIX]
for all the Oscillators set the wave to Image
Other than that you can leave OSC1 alone.
For OSC2 on the other hand set OSC2's Course detuneing [CRS] to -12, thats all for OSC2.
Now for OSC3 set the [CRS] -24.

Now move to the (ENV/LFO) Tab and the (Volume) sub tab;

Set the [DEL] to 0, if 0 is the default for [DEL] and [ATT] which i think it is don't mess with them, or actually do, experiment around and see what happens.
(top half)
Set the [DEC] to max (2)
Set the [SUST] to .787
Set the [REL] to .1
Set [AMT] to 1

Next to LFO;
make sure the wave is gray, if it is green click on it and it will turn gray.
Set the LFO[DEL] to .042
Set the LFO[ATT] to .013
Set the LFO[SPD] to .1
Filter should be [ON], set at LowPass, [FREQ] set to 9031 Hz and [RESO] to 4.8

Now move to (CUROOF) SubTab;
Set [HOLD] to .5
Set [DEC] to .5
Set [SUST] to .5
Set [REL] to .1

Nexto to (CUTOFF)'s LFO
[DEL] 0
[ATT] 0
[SPD] .1
[AMT] 0

Filter should be same as on volume tab

Now move to the (FUNC)

[STACKING] OFF
[Chord] OCTAVE
[ARPEGGIO] OFF
[CHORD] OCTAVE
[DIRECTION] UP
[MODE] FREE
Both [Range]'s should be 0
[GATE] 100

*NOTE I don't know how many of these Effects are actually being used
Now move to (FX) Tab

add the TAP Chorus/Flanger [W/D] MAX, all else is 0

for TAP Chorus/Flanger click Controls,

Now set these variables;
Frequency [Hz] 1.25
L/R Phase Shift [deg] 90
Depth [%] 34.375
Delay [ms] 25
Contour [Hz] 99.9
Dry Level [dB] 1.7875
Wet Level [dB] 19.9375

Your done with that window so you can close it

Your now done! Thank You for reading
Thank you for sharing.
Thank you for this cool tutorial PonchoKitty.
I have been struggling to make an electric guitar sound for a while now.
I will definitely try to make it tomorrow. :)
Thanks. :)