Page 6 of 9

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Wed Jan 01, 2020 2:12 pm
by contradev
Arturia Minilab Mk II

Linux Mint 19.3 Cinnamon 4.4.6
5.0.0-37-generic kernel
This worked out of the box - full control over encoders, pads, keys (pressure sensitive), pitch and bend modulators.

I was quite surprised as many reports online highlighted difficulties people had encountered, but maybe the latest firmware has solved this.

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Thu Jan 02, 2020 11:49 am
by musikbear
contradev wrote:
Wed Jan 01, 2020 2:12 pm
Arturia Minilab Mk II
Nice, will be added
You already made someone happy!
http://lmms.io/forum/viewtopic.php?f=4& ... 159#p66159

Besides that, since you are new in Forum
Welcome contradev !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sun Jan 05, 2020 7:51 pm
by Didier
Korg micro keys 25 bought on Amazon. It works well with Xubuntu 18.04.
I use lmms Appimage 1.2.1, vmpk. The sound system is Alsa, not jack.
The pitch (joystick), sustain, arpegiator work fine.
https://www.korg.com/fr/products/comput ... page_1.php

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Thu Jan 09, 2020 11:05 pm
by Mr. Lumbergh
Can anyone vouch for the Nektar GX61 on Linux?

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Fri Jan 24, 2020 4:42 pm
by dj-pixus
Midistart Music 25 works with Windows 7 Ultimate SP1 + LMMS 1.2.1 using WinMM MIDI, and also Debian Sid, kernel 4.9.0, LMMS 1.2.1 installed with APT, using ALSA Sequencer.
Korg NanoKontrol 2 also works on the Linux described above.

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sat Jan 25, 2020 1:19 pm
by musikbear
dj-pixus wrote: Midistart Music 25 works with Windows 7 Ultimate SP1 + LMMS 1.2.1 using WinMM MIDI, and also Debian Sid, kernel 4.9.0, LMMS 1.2.1 installed with APT, using ALSA Sequencer.
Korg NanoKontrol 2 also works on the Linux described above.
Didier wrote:
Sun Jan 05, 2020 7:51 pm
Korg micro keys 25 bought on Amazon. It works well with Xubuntu 18.04.
I use lmms Appimage 1.2.1, vmpk. The sound system is Alsa, not jack.
The pitch (joystick), sustain, arpegiator work fine.
https://www.korg.com/fr/products/comput ... page_1.php
Thank you to both of you!
Your hardware will be added to the wiki at next revision

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sun Jan 26, 2020 12:49 am
by Mr. Lumbergh
I can confirm that the Nektar Impact GX61 works with LMMS on the two setups I tried:
  • Debian sid/testing with the 64-bit 5.2 realtime kernel running ALSA as the backend on a Ryzen 3800X/Asus X570 home-build. As a side note, I haven't had luck getting JACK fully set up on this system yet, but that isn't an LMMS issue. The 5.4 RT kernel also seems to have some issues with sound generally, but that also isn't an LMMS issue.
  • PCLinuxOS 2000, fully updated with 5.4 x86_64 kernel on a Lenovo Ideapad Z580; ALSA is also the backend on this machine.
Pitch bend and LFO mod wheels both work as do the octave, transpose and setup functions. The playback and record functions on the console do not, but the documentation also suggests specific drivers and DAWs are needed for this functionality in Windows anyhow. I wouldn't know for sure, I don't do anything creative in Windows and so haven't bothered installing. ¯\_(ツ)_/¯

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sat Feb 08, 2020 4:56 pm
by musikbear
HITADIA wrote:
Sat Feb 08, 2020 12:20 am
Gps wrote:
Wed Nov 07, 2018 12:17 pm
The second one is the one I have , so its already in the list. Did not know that :)
Both working well with LMMS RC7 on Windows 7 Home SP1 and Windows 10 Home.
Thank you
will be added to the wiki at next revision


Besides that, since you are new in Forum
Welcome HITADIA !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sat Mar 21, 2020 9:39 pm
by leobel9
WORLDE Panda Mini controller working with lmms 1.2.1 on windows 10 64bit

Re: Post your MIDI-Hardware that works in LMMS here

Posted: Sun Mar 22, 2020 6:03 pm
by musikbear
leobel9 wrote:
Sat Mar 21, 2020 9:39 pm
WORLDE Panda Mini controller working with lmms 1.2.1 on windows 10 64bit
Interesting! We have never had any information about that manufacturer/ Mark of Keyboards -Thank you!

Besides that, since you are new in Forum
Welcome leobel9 !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions