I'm extremely new to this but after much trial and error I found a way to make a clank sound that I thought I'd share. Here's a wav file of what it sounds like:
https://sndup.net/hvcn/
Also, I'm sorry the pictures are so big! I'm not very tech savvy - I just blew up and moved a screenshot around in PowerPoint, saved each image an then uploaded them to imagebb. I probably should've cropped and resized them somehow.
To start off I set OSC1 to a sine wave and OSC2 to a triangle. I also increased the pitch of OSC2 (+40) and fine (0). (Fine looks slightly off in the picture.) M envelope is linked to OSC2 with amt (0). I don't think this affects anything.
Next, I have the Amp envelope. Attack (0), decay (75), sustain (0) and release (77).
Under Filter I have: attack (0), decay (74), release (94) and amt (max, 127). Frequency is max, resonance (75), saturation (36) and tracking (63). Filter type: LP12. This creates a sharper frequency cutoff (if I remember right), opposed to LP24
Now on to the LFO envelope with a triangle. Speed is (4)+(8) and amt (92). It's set to modulate the filter with tempo and key sync both enabled.
The second LFO (going to the right) also has a triangle with speed at max and amt at 10. Key sync is enabled and it's set to modulate OSC2 (as the "carrier").
For effects I enabled decimator. Ctl1 (controller 1) and ctl2 are both set to 64 and level is set to 24.
Finally, I have unison enabled with 2 voices. Detune (max), phase (68), spread (9) and pitch (max).
Now from my understanding unison makes things bigger. Phase creates 'phase offset' whereby waveforms occur at different intervals and spread widens the sound (stereo).
Happy tinkering everybody and thanks for reading!
https://sndup.net/hvcn/
Also, I'm sorry the pictures are so big! I'm not very tech savvy - I just blew up and moved a screenshot around in PowerPoint, saved each image an then uploaded them to imagebb. I probably should've cropped and resized them somehow.
To start off I set OSC1 to a sine wave and OSC2 to a triangle. I also increased the pitch of OSC2 (+40) and fine (0). (Fine looks slightly off in the picture.) M envelope is linked to OSC2 with amt (0). I don't think this affects anything.
Next, I have the Amp envelope. Attack (0), decay (75), sustain (0) and release (77).
Under Filter I have: attack (0), decay (74), release (94) and amt (max, 127). Frequency is max, resonance (75), saturation (36) and tracking (63). Filter type: LP12. This creates a sharper frequency cutoff (if I remember right), opposed to LP24
Now on to the LFO envelope with a triangle. Speed is (4)+(8) and amt (92). It's set to modulate the filter with tempo and key sync both enabled.
The second LFO (going to the right) also has a triangle with speed at max and amt at 10. Key sync is enabled and it's set to modulate OSC2 (as the "carrier").
For effects I enabled decimator. Ctl1 (controller 1) and ctl2 are both set to 64 and level is set to 24.
Finally, I have unison enabled with 2 voices. Detune (max), phase (68), spread (9) and pitch (max).
Now from my understanding unison makes things bigger. Phase creates 'phase offset' whereby waveforms occur at different intervals and spread widens the sound (stereo).
Happy tinkering everybody and thanks for reading!