Page 1 of 1

No sound output on Ubuntu even though output is selected

Posted: Fri Nov 02, 2018 6:12 pm
by falcon74
Hi,

Installed LMMS on Ubuntu Linux and configured it to use JACK. I've checked and found that the output of LMMS is patched to the system-output, in QjackCtl (i.e. patching seems proper).

LMMS settings are set to be:
  • Buffer size = 512
  • Audio interface = JACK
  • MIDI interface = ALSA Sequencer
However, I am unable to get any sound what-so-ever from LMMS. What gives ?

regards,
f74

Re: No sound output on Ubuntu even though output is selected

Posted: Sat Nov 03, 2018 12:52 pm
by musikbear
falcon74 wrote:
Fri Nov 02, 2018 6:12 pm
Hi,
Hi, Welcome to the Forum falcon74 !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions
Installed LMMS on Ubuntu Linux :: unable to get any sound
Sounds (nopun:) like you have a wrong release.
Remove current, and get:
https://github.com/LMMS/lmms/releases/d ... 4.AppImage

Install as AppImage.
Let us know the outcome :)

Re: No sound output on Ubuntu even though output is selected

Posted: Mon Nov 05, 2018 2:09 pm
by falcon74
musikbear wrote:
Sat Nov 03, 2018 12:52 pm
Hi, Welcome to the Forum falcon74 !
Thanks
Installed LMMS on Ubuntu Linux :: unable to get any sound
Sounds (nopun:) like you have a wrong release.
Remove current, and get:
https://github.com/LMMS/lmms/releases/d ... 4.AppImage
Install as AppImage.
[/quote]
So the LMMS that ships with Ubuntu (I mean the one available from official repos) is different from the AppImage ? I will give it a spin for sure, as I do have other audio apps working perfectly fine on this setup, but was curious.

Re: No sound output on Ubuntu even though output is selected

Posted: Tue Nov 06, 2018 3:37 pm
by musikbear
falcon74 wrote:
Mon Nov 05, 2018 2:09 pm
So the LMMS that ships with Ubuntu is different from the AppImage ?
Yes AppImage is the current most updated version. I believe repos ships with 1.1.3