LMMS • Forums

welp guys i was wondering if there are any help you can give me with some violins

i need a happy sounding violin and a sad one

also if there are any 8Bit music tips you can give me that would be appreciated

Hi, Welcome to the Forum TDA !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions

TDA wrote: ↑

February 2nd, 2019, 4:19 pm

violins -i need a happy sounding violin and a sad one

That is rather ambiguous,
Find a video or soundclip online, with the exact instrument sound(s), you are looking for. -Link to it!
You need to add exact timestamps, for where the wanted sound starts, and less important -ends
Like @2:32 -> 2:55

Regarding 8-bit, please open a new ticket. We only want one question / ticket.

Hi, you can find all the violin sounds you will need here (also a lot of other instruments!):

http://www.philharmonia.co.uk/explore/s ... les/violin

Just load it through the audio file processor synth in LMMS (see instruction manual) and then you can play it.

I found one note sample with a 4 second duration and it proved quite flexible when running it up and down through the scales.

Best regards

ronda wrote: ↑

February 2nd, 2019, 10:51 pm

Just load it through the audio file processor AFP synth in LMMS

Sorry, but AFP will not be able to use one good sample, in more than base-note position. A sampler is needed for that. Grace does work in Linux. I have not been able to use it in windows

Hi again,

Ok sorry about that, I'm not sure what Grace is but I downloaded a violin sound in MP3 from the Philharmonia website - which wouldn't load directly into the Audio File Processor, so I put it through Audacity and saved it as a .wav file and it then loaded into AFP OK. Here is the note I chose:

http://www.philharmonia.co.uk/assets/au ... normal.mp3

And this is then playable and sounds reasonable in LMMS from midway C3/C4 up to midway C5/C6 on the piano scale.

How do you get a sampler to work?

Best regards

Here is a 30 sec section from something I made earlier where I used the violin preset (made as above) - the violin comes in after about 15 seconds:

https://youtu.be/Sfe0rpjJJAs

Regards

ronda wrote: ↑

February 3rd, 2019, 10:19 pm

is then playable and sounds reasonable in LMMS from midway C3/C4 up to midway C5/C6 on the piano scale.

But the length will be wrong -That is the issue a good sampler will take care of

How do you get a sampler to work?

Linux-sampler works in linux, but afaik there is still no real sampler that does work in windows
We have had a long talk about samplers, and exchanged ideas and woes
https://lmms.io/forum/viewtopic.php?f=1 ... 9&start=10
But i could not use grace

Yes the length does shorten as the note gets higher - so all we can do is improvise.

Thanks and best regards