Not hearing anything??

[BlockBusterNG]

I was making my first original song on lmms, but i had to restart my computer. When I reopened lmms and pressed play, there wasn't any sound!

• -Windows 10
  -Im using SDL
  -LMMS v.1.2.0-rc7
  -I did check other sound making things such as windows media player and those do work
  -The tracks are activated
  -Master volume is activated
  -still hearing Dummy

[musikbear]

I was making my first original song on lmms

Hi, Welcome to the Forum BlockBusterNG !
Here are all important links:
http://lmms.io/forum/viewtopic.php?f=1&t=4740
-A few rules and useful forum instructions

restart my computer. When I reopened lmms and pressed play, there wasn't any sound!

All your info is spot on! (except the RC-thing -You should use 1.2.1

If your project only has one block, then you could accidented have pushed the velocity columns to 0 pos, but that should not influence anything else, and i have a feeling that you also have tested just tabbing the piano-graphics (?)
Odd..
Have you tried other projects?
Some times a filtered sound goes below limit of human hearing, and that blocks every output!
What i would like you to do, is the shut down your pc again, re-boot, and then browse to the demo-folder and open the project Greippi - Krem Kaakkuja.mmpz from the folder: //projects\\demos/
Just double-click it
Why that track? Because it only uses default instruments!
Then press play
What happens?

[BlockBusterNG]

and i have a feeling that you also have tested just tabbing the piano-graphics (?)

Yes, I have. I've tried tabbing everything except the song editor.

Have you tried other projects?

Yes I have, and none of those work either.

What i would like you to do, is the shut down your pc again, re-boot, and then browse to the demo-folder and open the project Greippi - Krem Kaakkuja.mmpz from the folder: //projects\\demos/

Then press play
What happens?

I restarted my pc and the sound is still dummy. I went to the demo folder and opened up Greippi - Krem Kaakkuja.mmpz to find no sound.

[BlockBusterNG]

Ok thank you for your help, I upgraded to 1.2.1 and it works now! Thank you again.